DALI Phantom K-60

Description

Dali's Phantom K-60 in-ceiling medium-sized speakers can visually be hidden away in your ceiling, concealed with a white paintable grille. Featuring Dali's renowned wood fiber woofer, this speaker can fit almost anywhere while still producing phenomenal sound.

WOOFER
Flexibility was important when designing the PHANTOM K-60, and the ability to use the speaker in areas not fit for traditional DALI speakers was a large part of this. To ensure the best audio reproduction, wood paper fiber was chosen for the cone material.

The woofer is tilted and angled for improved directionality and sound staging. The cone, surround and magnet motor system is designed according to the DALI low-loss principles. This makes the PHANTOM K-60 an easy speaker to drive, and even smaller amplifiers will be able to deliver a high-quality audio experience.

TWEETER
The 28 mm soft dome tweeter module in the PHANTOM E-60 is placed over the woofer in a composite housing mounted on an airplane-wing profile wishbone bracket. The dome tweeter can be physically tilted for optimal sound at the listening position. By mounting the tweeter over the woofer, the total footprint of the speaker is kept at a minimum.

The aerodynamic design of the wing and the slightly center placement of the tweeter help eliminate the "coaxial coloration" normally associated with coaxial drivers. The positioning also helps the mid-range and low frequencies blend gracefully with high frequencies for a precise and natural overall performance even at high sound pressures.

The compass rose on the outer edge to help direct the speaker to the optimum sound stage.

DESIGN
The PHANTOM K-60 introduces improvements to the basic design of the front baffle by adding extra thickness to the outer edges for a tighter and more secure fit against the mounting area. This also helps the overall strength and rigidity of the speaker.

The dogleg mounting system makes the installation process an easy one-step action. Simply insert the PHANTOM K-60 in the prepared mounting area, and from the front of the speaker tighten the dedicated screws to swing out the dogleg brackets and tighten them against the back of the mounting surface. If the mounting surface is extra thick, reversing the dogleg makes it possible to expand the mounting grip to 70mm.

The front grills have been updated to meet the style demands of the installed customer. The new sleek design helps the speaker integrate perfectly into the surroundings.

The price is per piece.